Wesprime

DESCRIPTION

A cost effective resin rich primer based on a pure acrylic resin.

USES

Wesprime is a premixed primer. It is an excellent primer for cement roof tiles, cement render, concrete or previously coated substrates that are to be coated with Westox Colourcote, Satintex, Glosstex or Wesdex. Wesprime can also be used as a clear Glazecoat over Colourcote.

PREPARATION

All surfaces to be coated must be clean, dry and free of any material that may affect the adhesion of the primer. Repair any unsound substrate prior to coating.

APPLICATION

No mixing required.  Apply by brush, roller or spray. If unsure of adhesion, carryout a small test section prior to full application. Allow primer to dry for a minimum 1 hour @ 25oC before applying top coats (a longer cure time will be required in lower temperatures).

PROPERTIES

 Drying Time  Approximately 20 mins @ 25°C
 Recoat Time  Approximately 1 hour @ 25°C
 Solids as supplied  25% +/- 3%
 Coverage  5 to 6m2 per Litre

CLEAN UP

Clean all equipment in water.

PACKAGING

Container Size  4 Litre and 20 Litre

SAFETY

Refer to Westlegate Pty Ltd Material Safety Data Sheet (MSDS) for instructions.

 

Click here to view and print TDS

Click here to view and print MSDS