Wesflex
DESCRIPTION
Westox Wesflex is a water based, fast drying flexible coating for use on interior and exterior applications. Westox Wesflex is a high quality surface finishing coating, exhibiting excellent flexibility - durability.
USES
Westox Wesflex is designed to provide a durable exterior weatherproof finish.
Westox Wesflex exhibits outstanding water resistance and crack spanning abilities and may be used for exterior work, where aesthetics and performance are of paramount importance.
FEATURES
- Water Resistant
- Can be recoated.
- Wide colour range
- Excellent resistance to cracking and chalking.
- High resin content.
- Excellent flexibility.
- Long life coating.
- Excellent resistance to fungus attack.
TECHNICAL DATA
| UV Stability |
Excellent |
| Specific Gravity |
1.2 |
| pH |
8.5 - 9.0 |
| Solids |
55 + / - 1% |
| Finish |
Satin |
| Boiling Point |
100°c (water based) |
| Elogation |
In excess of 200% @ 25°c un reinforced |
| Chemical Resistance |
Resists mild chemical environments and airborne pollutants |
| Not suitable for permanent immersion |
|
PREPARATION
- Do not apply coating if temperature is below 10°c or above 35°c.
- Do not apply coating if rain is imminent. Sound paint may be overcoated.
Not recommended for below grade waterproofing.
New concrete should be a minimum of 28 days old before application commences.
All holes and cracks are to be repaired prior to coating.
The surface to be treated should be clean and sound, free of oil, grease, flaking paint, laitance and material deleterious to the adhesion of the coating system.
COVERAGE
Apply Wesflex at the coverage rate of 5 to 6m2 per litre per coat (2 coats required). Allow 4 hours drying time between coats this should give a minimum D.F.T of 180 microns.
CLEAN UP
Wash all equipment in fresh water immediately after use.
PACKAGING
Container Size - 15 Litre containers.
SAFETY
Refer to Westlegate Pty Ltd Material Safety Data Sheet (MSDS) for instructions.
Click here to view and print TDS
Click here to view and print MSDS