Satintex

DESCRIPTION

A natural grain appearance provides soft to medium profiles, enhancing building design characteristics to suit the most fastidious of owners.

USES

For weatherproofing, decorating, restoring and protecting interior and exterior walls and to enhance existing building environments.

FEATURES

  • Easily applied
  • Wide colour range.
  • Can be overcoated to provide satin or gloss finish.
  • Weather and UV resistant.
  • Extremely durable.
  • Waterbased, no mixing required.

TECHNICAL DATA

 Volume Solids  68% +/- 1%
 Specific Gravity  1.4
 Flexibility  60% at 20°c
 Finish  Satin or Gloss

PREPARATION

  • Do not apply coating if temperature is below 10°c or above 35°c.
  • Do not apply coating if rain is imminent.  Sound coatings may be overcoated.

New concrete should be a minimum of 28 days old before application commences.
All holes and cracks can be repaired prior to coating.
The surface to be treated should be clean and sound, free of oil, grease, flaking paint, laitance and material deleterious to the adhesion of the coating system.

APPLICATION

Application by brush, roller or spray to the prepared pre-primed surface.
Apply at the rate of 1m2 per Litre and finish to the required texture.

  • Do not thin material.

CLEAN UP

Wash all equipment with fresh water immediately after use.

PACKAGING

Container Size – 15  Litre containers.

SAFETY

Refer to Westlegate Pty Ltd Material Safety Data Sheet (MSDS) for instructions

 

Click here to view and print TDS

Click here to view and print MSDS