Plastalite Bonding

DESCRIPTION

Plastalite Bonding is a lightweight gypsum based undercoat / render for interior use.

USES

Used on low suction backgrounds where increased adhesion is required, e.g. concrete plasterboard) or on surfaces treated with a PVA bonding agent.  (e.g. sound painted brickwork).

Plastalite Plasters can be used adjacent to heritage type plasters (e.g. sand and lime based) or modern type plasters (e.g. cement or gypsum based) without detriment.

FEATURES

  • Light weight
  • High Adhesion
  • Fire Proof 
  • Sound Proofing
  • Insulant
  • Easy mixing

TECHNICAL DATA

 Recommended Coating Thickness  8mm (minimum)
 Setting Time  1 - 1.5 hours
 Shelf Life  3 months
 Approximate Coverage per 20kg bag  2.5 - 3.5 m2

APPLICATION

Surfaces to be rendered should be free of form release agents, oil or grease or any materials that may affect the adhesion of the plasterlight bonding.  Mix material with water in a suitable mixing vessel to a usable consistency.  Apply the mixed material by trowel, screed and wood float to a flat even surface ready for a set finish, or scratch to provide a key if Plastalite Browning is to be used prior to setting.

LIMITATIONS

Plastalite Bonding can not be used for external applications or internal wet areas.  (e.g. bathrooms) for exterior or wet area applications refer to Plastalite “Rehabilitation Render” or Plastalite “Cement Set” Data Sheets.

PACKAGING

Plastalite Bonding is supplied in 20kg plastic lined, multi-walled paper bags.

SAFETY

Refer to Westlegate Pty Ltd Material Safety Data Sheet (MSDS) for instructions.

 

Click here to view and print TDS

Click here to view and print MSDS